VMC Machine 500 & 600

VMC machine 500 ＆600 is a vertical bed structure, the feed axis is X, Y, Z three coordinate control, the maximum rapid traverse speed is up to 20m/min; the main shaft is servo motor power drive, the power is 3.7Kw, the maximum speed is 8000rpm; The double-nut pre-pressed C3 ball screw is used, and the pre-stretching mechanism is adopted at both ends, which greatly eliminates the influence of thermal deformation on the precision of the CNC machining center. The positioning accuracy of the VMC machine is up to 0.008 mm; the bucket type and the disc type are optional. The tool magazine is accurate and reliable. The CNC operating system of VMC machine has customers’ choice. Machining center tool can realize the clamping of complex parts such as various discs, plates, shells, cams and molds, and complete drilling, milling, boring and expanding. Various processes such as hinge and tapping are suitable for the production of multi-variety, medium, and small-volume products, and can display the superiority of processing complex and high-precision parts. Vertical machining center can realize complex reversal if it is equipped with the fourth and fifth axes. Efficient, high-precision automated machining of parts. CNC vertical machining center is suitable for high-efficiency and high-precision automatic processing of small and medium-sized parts in aerospace, military and national defense, automobile and motorcycle, engineering machinery, refrigeration, and petrochemical, rolling stock and other industries.

VMC machine 500 ＆ 600 Specification

No	Item	VMC500	VMC600
1	X-axis travel	500 mm	600 mm
2	Y-axis travel	300mm	350mm
3	Z-axis travel	400mm	450mm
4	Spindle nose to table	90-490mm	90-540mm
5	Spindle center to column	360mm	385mm
6	Workbench size	650×260 mm	800×320mm
7	T-slot	16×3×80 mm	16×3×100 mm
8	Workbench maximum load	400 kg	400 kg
9	Spindle taper	BT40	BT40
10	Spindle power	3.7 kW	3.7 Kw
11	Spindle rotation number	8000rpm	8000rpm
12	Cutting speed	1-6000 mm/min	1-6000 mm/min
13	Fast speed	X/Y/Z: 20m/min	X/Y:20m/min Z:16m/min
14	Positioning accuracy	0.008/300 mm	±0.01/300 mm
15	Required air pressure	26.5 kgf/cm	26.5 kgf/cm
16	Power capacity	11KVA	12KVA
17	Machine tool footprint	2200×1800×2150 mm	2300×1900×2250mm
18	Machine weight	2200×1800×2150 mm	2300×1900×2250mm

VMC machine 500 ＆ 600 Features

★High rigidity: It adopts the bed-type machining center structure. The vertical machining center for sale consists of a base, slide seat, work table, column, and headstock. The main basic parts are analyzed by finite element structure, the structure is reasonable and the rigidity is large; all machine tool castings are hot. Aging treatment, precision has long-term stability.

★Vertical machining center manufacturers adopt high-speed, high-precision and rigid Taiwan spindle unit. The spindle material is made of high-performance alloy steel. The P4 high-speed precision bearing for the spindle is used, and the high-speed grease is used. The spindle speed reaches 8000 rpm and the spindle radial runout is less than 0.008/300.

★X, Y, Z direction feed adopts C3 grade double nut preloaded precision ball screw. The servo motor is directly connected with the lead screw through high torque and low inertia inlet elastic coupling, and the lead screw support adopts pretensioning structure. It can eliminate the backlash of the transmission and compensate the influence of thermal deformation on the precision of small CNC machining center during long-term operation to ensure the positioning accuracy and repeat positioning accuracy.

VMC machine 500 & 600 Installation Requirements

1. Power supply and environmental requirements:

1.1 Power supply voltage: 380V ± 10%

1.2Power frequency: 50HZ ± 1%, three-phase

1.3Gas source: 6kg/cm2 After proper drying

2. Environmental conditions for use:

2.1Relative humidity: ≤80%

2.1Ambient temperature: 0°C-40°C

2.3Air medium: non-corrosive medium

2.4 Light: adequate, well ventilated

2.5 CNC machining center for sale works stable for a long time under the above working conditions.

3. Installation site conditions

3.1Not affected by external vibration.

3.2Not affected by corrosive gases.

3.3Avoid direct sunlight on a high-speed machining center.

3.4Avoid direct contact with outside wind, air and temperature regulation of cold and hot air.

3.5Avoid setting heat sources such as heating near the small vertical machining center.

3.6Reduce dust (avoid castings, welding, sheet metal workshops, etc.).

About HAISHU Machinery

As the professional CNC machine designer and manufacturer, Taian HAISHU Machinery Co., Ltd (Haishu Machinery) is the high-tech enterprise specialized in CNC machine development, production, sales and service since 2001. We have more than 30 professional talented CNC experts and more than 12,000 square meters manufacturing factory.  More than 16 series 80 kinds of CNC machines and related parts had been manufactured to satisfy your pumping requirements. Our high quality and innovative products include CNC lathe, CNC milling machine, CNC machining center, CNC turn-mill machine, CNC tool grinding machine, CNC pipe threading lathe, CNC wood lathe, stone CNC machine, CNC root canal file grinder and custom CNC equipment for special requirements.

HAISHU Machinery is not only manufacturing best quality CNC machine products but also providing custom product design and after sale services. Welcome, contact us for detailed information.