CNC Vertical Milling Center VMC850 a semi-closed loop vertical machining center controlled by X, Y and Z three-axis servo. The three axes are steel ball rolling linear guides. The guide rail has a large load, wide span and high precision. The structure and external dimensions are compact and reasonable. The main shaft is the servo motor driven by the synchronous belt. The small machining center can realize the clamping of complex parts such as various discs, plates, shells, cams, and molds. Milling, boring, expansion, hinge, rigid tapping and other processes, suitable for the production of multi-variety, small and medium-sized products, can meet the processing of complex, high-precision parts. It can be equipped with a fourth rotating shaft to meet the processing requirements of special parts.
The Peru customer needed a Vertical Machining Center. According to the request of table size, he needed a small size, We chose CNC Vertical Milling Center VMC850 for him. After checked the parameter and configuration of the Vertical Machining Center VMC850, He confirmed the machining center was suitable for him and asked for PI. A few days later, he arranged the payment.
After the CNC Vertical Milling Center VMC850 completed, We invited him to accept the test. Because he already knew our machine quality. He said that he didn’t have time and was very comfortable with our machines. So we sent him the CNC Machining Center VMC850 to operate video and detail pictures. He was very happy to cooperate with us again.
CNC Vertical Milling Center VMC850 Specification
| Model/Specifications | VMC850 |
|---|---|
| X-axis travel | 800mm |
| Y-axis travel | 500mm |
| Z axis travel | 500mm |
| Table size | 1000*500 mm |
| Maximum load of table | 500kg |
| T-solt | 5*18*100mm |
| Spindle taper | BT40 |
| Spindle maximum speed | 8000rpm |
| Rapid traverse | 48/48/48m/min |
| Spindle power | 48/48/48m/min |
| Spindle power | 7.5Kw/11kw |
| Cutting speed | 1-8000 mm/min |
| Spindle nose to table | Spindle nose to table |
| Spindle center to Surface rail | 525mm |
| Max tool diameter | 78/120mm |
| Positioning accuracy | ±0.0075 mm |
| Repeat accuracy | ±0.005 mm |
| Machine weight | 5600kg |
| Machine Size(mm) | 2600 *2300*2800 |
CNC Vertical Milling Center VMC850 Features
High rigidity. The vertical milling center adopts the bed-type machining center structure. The vertical machining center for sale consists of a base, slide seat, work table, column, and headstock. The main basic parts are analyzed by finite element structure, the structure is reasonable and the rigidity is large; all machine tool castings are hot. Aging treatment, precision has long-term stability.
The vertical milling center manufacturers adopt high-speed, high-precision and rigid Taiwan spindle units. The spindle material is made of high-performance alloy steel. The P4 high-speed precision bearing for the spindle is used, and the high-speed grease is used. The spindle speed reaches 8000 rpm and the spindle radial runout is less than 0.008/300.
X, Y, Z direction feed adopts a C3 grade double nut preloaded precision ball screw. The servo motor is directly connected with the lead screw through high torque and low inertia inlet elastic coupling, and the lead screw support adopts a pretensioning structure. This CNC machining center can eliminate the backlash of the transmission and compensate for the influence of thermal deformation on the precision of small CNC machining center during long-term operation to ensure the positioning accuracy and repeat positioning accuracy.
CNC Vertical Milling Center VMC850 Installation Requirements
1. Power supply and environmental requirements.
1.1 Power supply voltage: 380V ± 10%
1.2Power frequency: 50HZ ± 1%, three-phase
1.3Gas source: 6kg/cm2 After proper drying
2. Environmental conditions for use.
2.1Relative humidity: ≤80%
2.1Ambient temperature: 0°C-40°C
2.3Air medium: non-corrosive medium
2.4 Light: adequate, well ventilated
2.5 CNC machining center for sale works stable for a long time under the above working conditions.
3. Installation site conditions
3.1Not affected by external vibration.
3.2Not affected by corrosive gases.
3.3Avoid direct sunlight on a high-speed machining center.
3.4Avoid direct contact with outside wind, air and temperature regulation of cold and hot air.
3.5Avoid setting heat sources such as heating near the small vertical machining center.
3.6Reduce dust (avoid castings, welding, sheet metal workshops, etc.).
About HAISHU Machinery
Taian HAISHU Machinery Co., Ltd (Haishu Machinery) mainly engaged CNC lathe, CNC milling machine, Vertical Machining Center, CNC Vertical Milling Center VMC,CNC turn-mill machine, CNC tool grinding machine, CNC pipe threading lathe, CNC wood lathe, stone CNC machine, CNC root canal file grinder, custom CNC equipment and other products research and development, production. The company has a technology research and development center and product supervision and testing center. Through years of hard work, we have developed into a famous machine tool enterprise in China.
Our company’s products are sold well in the country with stable performance and reliable quality, and are exported to more than 50 countries. The company pursues a brand-name, high-grade quality strategy, and has been rated as a contract-honoring and credit-worthy enterprise by the Provincial Industrial and Commercial Bureau.We will adhere to the “integrity, initiative, responsibility, cooperation” policy, abide by the “customer’s success is our success” business philosophy, to provide you with advanced products, perfect after-sales service.
